Aquasure+FD Flexible and Durable Urethane Repair Adhesive & Sealant, Gear Aid by McNett, the industry standard for maximum strength repairs to wetsuits, drysuits and all watersports products. The flexible adhesive with its safe and environmentally friendly toluene free urethane formula waterproofs, seals and also protects against abrasion. Hundreds of watersports and household uses.
McNett Aquasure+FD urethane adhesive is the industry standard for high strength permanent repairs to all kinds of dive equipment. Instant on the spot or overnight repairs to practically all types of equipment: clothing, gloves, dive suits, footwear, boats, kites, waders, spray decks, luggage etc.
McNett Aquasure+FD adhesive provides a clear, strong and flexible finish for permanent waterproof repairs for use on most materials, including: neoprene, rubber, textiles, hypalon, PVC, polyester, nylon, polyurethane etc - does not bond to silicone coated surfaces. Urethane adhesive is the best for achieving maximum strength and durability. Full instructions provide helpful advice and how best to prepare surfaces prior to use.
For fast cure, use with Cotol-240(TM) Cure Accelerator.
DIRECTIONS FOR NEOPRENE REPAIR:
Clean damaged area with Cotol-240(TM) Cure Accelerator/Precleaner or solvent
Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquasure to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.
Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with McNett Aquasure. Remove tape after full cure.
SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.